Home ProductsRefractive Examination instruments ≫ LM-30

Auto Lensmeter LM-30


While only small, the LM-30 is packed with all the technological innovations we have developed in the field of ophthalmology.
Outstanding features
  • Simple : Easy to operate. You will even be able to measure progressive lenses right from day one
  • Quick : Responsive, no frustration
  • Accurate : High measurement accuracy
  • Automatic : Automated measurement as well as data reading and storage


Measurement of contact lenses
Contact lenses can be measured in the same way as the single vision lenses by attaching the nose piece for contact lenses.
ABBE number
The LM-30 will automatically compensate the measured values when a different ABBE number is selected, providing more accurate measuring results. Numbers selectable are from 30 to 60, in increments of 5, a total of 7 settings.
Real-time prism power measurement
Prism power is read at arbitrary point, and displayed in two forms: rectangular (BU/BD, BI/BO) and polar (Δ/ deg.) coordinates.
Automatic detection of progressive lenses
The auto-detect function of the LM-30 detects progressive lenses when a lens is placed on the nose piece. Once it detects a progressive lens, it automatically switches itself to progressive lens measuring mode, which eliminates cumbersome manual operations. No more mistakes in lens type detection.
Good visibility with the large back-lit LCD
With the use of a large (89mm x 46mm) LCD, the measured value are easy to read. Furthermore, the display is backlit, providing excellent visibility even in a dimly lit room. Measured results of left and right lenses are temporarily stored, and then displayed sequentially when the READ button is pressed.
Two modes of measurement; manual and automatic
The LM-30 is equipped with automatic mode as well as manual modes. Sphere power, cylinder power, and cylinder axis as well as ADD power in a progressive lens are automatically read. By pressing the HOLD button, the measuring mode can be switched between manual and automatic.
The LM-30 measures in increments of 0.25D, 0.12D, or 0.01D (3 steps).
Also, when testing finished progressive lenses, lenses can be checked in units as small as 0.01D.

Specifications

Measurement ranges
Sphere ±25D
Cylinder ±9.99D
Axis 0 to 180°
Addition 0 to 9.99D
Prism 0 to 9.99Δ
Measurement Units
Power 0.01/0.12/0.25D
Prism 0.01/0.12/0.25Δ
Measurement Modes
Cylinder +/±/-
Prism Rectangular/Polar coordinates
Sampling Speed 0.035 seconds
Measurement
Wavelength 660nm
Diameter of the beam 3mm
Lenses Spectacles, Hard and Soft Contact Lenses
Abbe Numbers 30 to 60 (5-unit increment)
Data Display Screen Two Dimensional LCD, Back Illuminated
Alignment Cross/Cursor (thickens when lens is aligned)
Dimensions 200mm (W) x 260mm (D) x 436mm (H)
Weight 5.0kg
Main Supply Voltage 100 to 240V, 50/60Hz
Power Consumption 35VA